Montessori Happy Bed

– Your bed frame is made of solid beech wood. Beech is a special tree that defies hard, intense years. Pine is very different from spruce and fir. It can be assembled & disassembled many times. It is resistant to impacts. Beech wood is preferred in toys due to its antibacterial properties. – The varnishes and paints used are non-toxic and N71-3 certified water-based. Lead values are low, suitable for food contact. If they gnaw during the teething period, they can be easily excreted from the body. – For the safety of our children, all corners and edges have been softened. There are no sharp, pointed edges, splinters. – The size of the bed is +8 cm from the width and length of your inner bed you have chosen. During your order, please specify the height (thickness) of your mattress that you will use in the notes section, and the barrier height will be adjusted according to that height. The remaining barrier height after the bed is recommended as a minimum of 15 cm and a maximum of 20 cm. – The bed does not directly touch the ground, there are mdf panels on 5 cm grids at the bottom. Slats are not used. In this way, it provides thermal insulation, the performance of the bed (mattress) does not decrease, and the whole family can easily carry it while sitting and spending time together. From the outside, it is zero to the ground, and thanks to this, dust and house mites cannot get under it. The MDFs used are certified and suitable for children. – 90×190 cm and above is an adult bed size. Therefore, it allows use for many years